Here are the latest and greatest pictures of the project. In these pics you will see that the bottom of the aircraft is filled and sanded with Smooth Prime from Poly Fiber. So far I really like this stuff. After pushing the airplane out on the ramp to flip it over I decided to lit it sit out in the California sun to heat up and post cure the epoxy a bit. It didn't take long and it was almost too hot to touch. Notice the un-carved blocks of foam glued to the wing tips, they look kinda funky huh? After I pushed her back into the hanger I spent the rest of the afternoon shaping the tops of the wing tips as you can see in the bottom pics. The last pic is the nose bowl I plan to use.