|
|
Service Set-To Torques should be used when assembling components.
Service In-Use Recheck Torques should be used for checking a pre-torqued item.
| Service Set-To Torque |
Service In-Use Recheck Torque |
|
| Front and Rear Output Shaft Yoke Nuts | 240 | 225-250 |
| Front Output Shaft Rear Bearing Cover to Case Bolts |
30 | 28-32 |
| Intermediate Shaft Lock Plate to Case Bolts | 14 | 12-15 |
| Lower Cover to Case Bolts | 14 | 12-15 |
| Rear Bearing Cap Assembly to Case Bolts | 30 | 28-32 |
| Right and Left Shift Fork Setscrews | 14 | 12-15 |
| Shift Rod Housing to Case Bolts | 30 | 28-30 |
| Transfer Case to Transmission Bolts | 30 | 28-32 |
All Torque values given in foot-pounds with dry fits unless otherwise specified
