Cold Air Induction
In order for this to work you must have an after market air intake system. If you already have a CAI you do not need to do this.
Go to your local home depot or home store. Go back to the area where they sell the dryer hoses that allow the heat exit the house. You can use the 3" or the 4" Aluminum hoses.
[picture unavailable]
I used the 4" hose, What you have to do is take one end of the hose and wedge it on to your air filter. This allows the air to be inducted in to the engine once hooked up. Take the other end and start running it towards the bottom of the engine. Your gonna run the hose around the bumper frame and out in to the fender well on the passenger side.
[picture unavailable]
Reach your hand up in there and pull it through to the front and run it into the back side of the front bumper. Poke some small holes in to the sides of hose with a pen or something. This allows you to be able to tie the induction hose to the front bumper with some tie wraps. Tie it up anyway that you can to the front grill pieces.
[picture unavailable]
©2001 Honda/Acura. All rights reserved.
|