|
Posted by stacy on September 22, 1999 at 19:33:45:
In Reply to: Re: Brake Assist posted by stacy on September 22, 1999 at 19:06:16:
bob youd bet that the volume on my calipers from the wing was less than the ones id taken off
in hydraulics its not the volume that is important but the sq inches of the piston the actual volume which includes the length of the cylinder has no effect
and in this case the cylinder i took off were about im guessing here 7/8 dia which is about .601 sq in and the calipere were about 1 3/8 which is about 4.3 sq inches
and the more sq in on the cylinder side or less sq inches on the pump or mc side the more pressure is exerted out for the same pressure or force in
example look at a bottle jack a ton jack has a much larger diameter piston than a 1 or 2 ton jack
hope this makes some hydraulic cents
| 
