 |
 |
| With a new steering head manufactured by the local machine shop I installed
the forks! |
Well, it is sittin' on three wheels.. |
 |
 |
| Detailed shot of the frame welded to the top of the now trimmed tunnel. |
The frame welded to the steering head.. |
 |
 |
| Seat frame is bend from 3/4" conduit. Handle bars are bend from 3/4"
heavy wall pipe. Tip on bending pipe: Fill the pipe full of fine sand (silica)
and weld the ends shut. Now when you bend the pipe it stays nice and round.. |
I started on the back seat and the back rest. The idea from the back
rest is from Dean Gangstee's trike Phoenix. The driverseat will be trashed
later due to a better idea.. |
 |
 |
| Looks already like a trike. Should find a steep hill and I could ride
it..No brakes trough!?*%#@ |
Detailed shot of the back seat frame. 1" square tubing. |
 |
 |
| Finished backrest bolted onto VW axle. Done with 3/4" Conduit bend
with a conduit bender. |
Looks more and more like a trike.. |
