|
Cut out the transfer from the transfer sheet with a knife, and put it in a saucer of water. Leave it for about 45 seconds and the it will slide off when you push it gently with a brush. Do this next to the model and slide it onto the area. You can now move the transfer to the right position on the arm pad if you keep the area wet. When it is in the right place, remove any excess water with some tissue. I suggest that, when the transfer is dry, you give the model a blast with some matt spray varnish to seal the transfer.
This not answer your painting and modelling needs? Click here to email us a question, or here to try another level of skill.
Is there anything you would like to add or a section/technique you think should be added to the painting guide? Why not send us an email about it. We will add anything we think is useful.
________________________________________________________________________________
This section written by Merchant Prince
Please feel free to print this page for personal use only. Remember, these are not strict guidelines, they are a selection of techniques we use. If you want to change any of our advice so it suits your own painting style then by all means do! Our aim is to help everyone become a better painter.
|