|
|
A paint mixer easily made with parts from Radio Shack and your favorite hobby store.
The parts list is quite flexible: Small motor from RS, Two AA battery holder also from RS, A piece of brass tubing from your favorite hobby shop, it should just slide over the motor shaft, Cut a slit in one end solder or ACC a small piece of scrap brass in. The open end of the tube is ACC'd to the motor shaft. If it runs with a little vibration it seems to agitate the paint better
HAPPY MIXING!!!!
If you have comments or suggestions, email me at raul@nconnect.net
This page created with Netscape Navigator Gold
